• Quickly and gently remove excess mucus
• Low operation noise
• Waterproof and washable
• Stands upright for easily storage
• Compact and Ergonomic design allows great grip and control
• Two sizes of silicone tips included provide perfect fit for any size noses
Differ from traditional manual aspirator, NA-802 Waterproof Nasal Aspirator offers a continuos nasal suction. The Nasal Aspirator makes it easier to take a good care of your babies. Furthermore, every single item comes with two sizes of soft silicone tips, which is fit for all sizes of nose. It means all the ages are applicable for our NA-802 Waterproof Nasal Aspirator.
| Vacuum pressure | 50 - 60k Pa |
|---|---|
| Size | 195mm x 50mm x 40mm |
| Weight | 160 grams |
| Power | Two AA Batteries |
| Battery Life | Approx. 2 hours |
| Operation Environment | Temperature: 5°C ~ 40°C Humidity: 15% ~ 93% Atmospheric Pressure: 700 ~ 1060 hPa |
| Storage & Transportation Environment | Temperature: -10°C ~ 50°C Humidity: ≦93% Atmospheric Pressure: 700 ~ 1060 hPa |
| Certificate | FDA, CE, RoHS, REACH, PAHs |
1. Separate the upper cover away from the lower cover in a straight direction. Do not bend the covers by brute force as it can be slid open easily.
2. Insert 2 x 1.5V AA alkaline batteries with the correct polarity as shown.
3. Check to make sure that the two silicone rings are properly seated on the grooves. Close the covers until the “click” sound is heard.
4. Choose the suitable silicone tip based on the size of patient’s nostrils.
5. Be sure to place the silicone tip securely on the mucus cup.
6. Gently insert the silicone tip into patient’s nostril. Do not insert it too deeply.
7. Press the button for a few seconds to collect mucus. Stop pressing the button when finished using the device and then the power will be stopped.
1. Be sure that the upper and lower covers are closed firmly before cleaning the device.
2. Remove the silicone tip.
3. Hold the mucus cup with the part between thumb and index finger.
4. Bend the mucus cup downwards gently to remove it from the collar.
5. Remove the silicone rings from the collar for cleaning every several uses of the device. The silicone rings do not need to be cleaned every time.
6. Wash the parts thoroughly with clean water and soap. Rinse the collar under the tap. Dry the parts before assembling them.
Our NA-802 WATERPROOF nasal aspirator offer a limited one (1) year warranty.
This warranty does not extend to failures resulting from accident, misuse, abuse, alteration, use of unauthorized service, parts or cleaning solutions, or failure to comply with Instruction Manual.
Related Items
Medical Products
Health Care Products
Beauty Equipment
Food Supplement
Veterinary Equipment
